Wheels

Good condition. Rim is straight - no dents or flat spots. Chrome is decent with some light pitting. Spokes have a coat of surface rust. Dual disc compatible. Inside surface has rust - no rot. Bearings are stuck from sitting idle. 18x1.85in. Suzuki rim part# 55311-44060. Fits Suzuki: GN400T 1980-81 GN400TX...

Rim is straight. No flat spots. No bead edge gouges. No drive spline. Bearings are good. Includes rotor nuts. Finish is heavily deteriorated and tarnished in the brake side. 2.5x17in. Honda part# 42650-463-670. Fits Honda: GL1100 GOLDWING 1980-82 GL1100I GOLDWING INTERSTATE 1980-81 1980-82 Honda GL1100...

Rim is straight. No flat spots. No gouges. Drive spline is in good condition. Bearings are good. Includes rotor nuts. Needs some polishing. 2.5x17in. Honda part# 42650-463-670. Fits Honda: GL1100 GOLDWING 1980-82 GL1100I GOLDWING INTERSTATE 1980-81 1980-82 Honda GL1100 GL1100I Goldwing Comstar Rear Wheel...

Good condition. Wheel is straight with no flat spots. Bearings are good. Sprocket carrier seal is good. Finish is tarnished, scuffed and scratched throughout. Stamped R-1037. 16x2.50in. Kawasaki part number: 41073-1055. Fits Kawasaki: KZ400H 1979 KZ440A LTD 1980-83 KZ440D LTD BELT DRIVE 1980-83 1979-83...

Good condition. Wheel is straight with no flat spots. Includes rotor bolts and plate. Includes plastic hub cap for single disc use. Single or dual disc compatible. Bearings are reasonably smooth. Finish is tarnished, scuffed and scratched throughout. Stamped F-1027. 19x1.85in. Kawasaki part number: 41073-1041....

Good condition. Rim is straight with no flat spots. Drive spline is good. Bearings are sticky from lack of use. Hub seal is good. Anodized finish is decent under the grime - some tarnish. 16x3.00 in. Yamaha part# 3H3-W2533-01. Fits Yamaha: XS850S Special 1980-81 XS1100S Special 1979-81 1979-81 Yamaha...

Rim is straight. No flat spots. Finish is good with some moderate scuffs and scratches. Drive spline is in good condition. Bearings are good. Includes rotor nuts. Needs some polishing. 2.5x17in. Honda part# 42650-431-780. Fits Honda: GL1000 GOLDWING 1979 NOTE: Will also fit 1978 model but the spoke detail...

Rim is straight. No flat spots. D.I.D. rim has some moderately pitted spots and two moderate sidewall scrapes. Hub finish is lightly tarnished. There is a signifiacant gouge in the finish on the drive side of the hub. A few spokes have suface rust spots. Plenty of brake lining remaining. Bearings are...

Good condition. Rim is straight with no flat spots. There are some minor scrapes and scratches on the sidewalls. Includes rotor bolts. 19in. Honda part# 44650-426-771. Fits Honda: CB650 1979 CB750L 1979 1979 Honda CB650 CB750L Front Comstar Wheel Rim 44650-426-771

Good condition. Rim is straight with no flat spots. There are some minor scrapes and scratches on the sidewalls. Black anodizing is faded. 17in.

Good condition. Rim is straight - no flat spots. Rim finish is tarnished throughout. There are some moderate scrapes and gouges on the rim edges. Spokes have surface rust. Brake lining wear measures 119.9mm (max 120.75mm). Bearings are smooth. Takasago 17x2.15in aluminum rim. Kawasaki part numbers: 41025-1016...

Good condition. Rim is straight with no flat spots. Drive spline is good. Bearings are good. Hub seal is good. Anodized finish is poor and will need paint. 17x2.50 in. Yamaha part number: 2H8-W2533-00-00. Fits Yamaha: XS850 1980-81 XS1100 1978-81 1978-81 Yamaha XS850 XS1100 Rear Wheel Rim 2H8-W2533-...

Good condition. Rim is straight. No dents or flat spots. Finish is lightly tarnished throughout. Some spokes have surface rust. Includes rotor bolts and hub cap. Bearings are smooth. Some sidewall scrapes from tire changes. Takasago aluminum rim. 2.15x18in. Suzuki part numbers: 65311-49000 and 64110-45001....

Good condition. Wheel is straight. No flat spots or damage. Spoke rivets are solid. No major gouges in bead edges - some small scrapes. Some surface rust on the spokes. Bearings are stiff from lack of use. 19x1.85in. Honda part# 44650-431-670. Fits Honda: GL1000 Goldwing 1978 1978 Honda GL1000 Goldwing...

Rim is straight. No flat spots. Finish is good with some moderate scuffs and scratches. Some minor scrapes and nics in the bead edge. Paint is deteriorated on the hub. Drive spline is in good condition. Bearings are good. Includes rotor nuts with surface rust.. 2.5x17in. Honda part number: 42650-431-670....

Rim is straight. No flat spots. Finish is good with some moderate scuffs and scratches. Some minor scrapes and nics in the bead edge. Paint is deteriorated on the hub. Drive spline is in good condition. Bearings are good. Includes rotor nuts with surface rust.. 2.5x17in. Honda part number: 42650-431-670....

Good condition. Wheel is straight with no dents or flat spots. Finish is good with minimal scratches. There is some light surface rust on the non-disc side of the hub. All plastic spoke covers are intact. Includes rotor bolts. Single rotor version. 19in. Honda part# 44650-415-315. Fits Honda: CX500 1978...

Good condition. Wheel is straight. No flat spots. Includes rotor mounting nuts and bolts. Includes hub cover for single disc use. Rim finish is very good with some moderate nics and gouges on the edges. Spokes have some moderate surface rust spots. Bearings are smooth. Hub seals are good. All plastic...

Good condition. Rim is straight. No dents or flat spots. Chrome has light pitting throughout and a few spots heavier pitting. Spokes have a few spots of surface rust. Includes rotor bolts. Inner surface has some surface rust - no rot. Bearings are smooth. Takasago rim. 19x1.85in. Suzuki rim part# 55311-34020....

Good condition. Wheel is straight with no dents or flat spots. No sidewall or bead edge gouges. Finish is poor and will need paint. Bearings are tight and smooth. Threaded holes are good. Seals are good. 1.85x19 inch. Yamaha part# 2H9-25168-29. Fits Yamaha: XS1100 1978-81 XS1100S 1979-81 XS750 1977-79...

Good condition. Wheel is straight with no dents or flat spots. Finish is dulled and tarnished. Bearings are sticky from lack of use. Threaded holes are good. Seals are good. 1.85 x 19 inch. Yamaha part# 2H9-25168-29. Fits: XS750 1977-79 XS750S 1979 XS850 1980-81 XS850S 1980-81 XS1100 1978-81 XS1100S...

Good condition. Wheel is straight. No flat spots. Has yellow paint residue - original finish beneath appears to be very good. No gouges in the bead edge. Some light tarnish on the aluminum. Includes rotor bolts. Bearings are very smooth. 18x2.15in. 1977-79 Suzuki GS550E Rear Wheel

Fair condition. Rim is straight. No dents or flat spots. Wheel has been painted - needs to be re-done. Includes rotor bolts. Bearings are have been replaced with 17mm instead of original 20mm - will fit early '80s GS axles. 18x2.15in. Suzuki part number: 64111-47602, 64111-47602-12U. Fits Suzuki: GS550E...

Good condition. Wheel is straight. No dents or flat spots. Includes rotor mounting bolts. 2.15x18in. Bearings are good. Drive spline is in very good condition. Finish is grungy and needs a good clean-up. Blue nylon pin stripe has been added. Grey anodized. There are some significant scapes and scratches...

Good condition. Wheel is straight. No damage. Has yellow paint residue - original finish beneath appears to be very good. Includes rotor bolts for one rotor. Single or dual disc compatible - includes hub cap for singe disc use. Bearings are very smooth. 19x1.85in. Suzuki part number: 54111-47620. Fits...

Good condition. Rim is straight. No dents or flat spots. Wheel has been painted - needs to be re-done. Includes rotor bolts. Single or dual disc compatible. Includes hub cover to run single disc. Bearings are good. 19x1.85in. Suzuki part number: 54111-47620. Fits Suzuki: GS550E 1977-79 GS750E 1977-79...

Good condition. Wheel is straight. No flat spots. Includes rotor mounting nuts. Hub finish is deteriorated and peeling. Rim finish has some minor tarnish spots. Spokes have a few small surface rust spots. There is one moderate tire lever gouge on the lip of the rim. Bearings are smooth. Hub seals are...

Good condition. Wheel is straight. No dents or flat spots. Includes rotor mounting bolts. 2.15x18in. Bearings are good. Drive spline is in very good condition. Finish is grungy and needs a good clean-up. Blue nylon pin stripe has been added. Grey anodized. There are some significant scapes and scratches...

Good condition. Wheel is straight with no dents or flat spots. Finish is grubby and has some paint overspray - needs a good clean-up. Bearings are sticky from sitting idle. Includes rotor mounting bolts. Seals are good. 1.85x19 inch. There are some significant scrapes on one section of the sidewall....

Good condition. Rim is straight with no flat spots. Finish is tarnished throughout. Bearings are stiff and a little rough. Spokes have plenty of surface rust. Brake lining has a layer of surface corrosion. 21x1.6in. Suzuki hub part# 54110-41100. Fits Suzuki: PE250B 1977. May fit other years - appears...